User's Manual

Troubleshooting and Frequently Asked Questions 107
Within Hardware Configuration, what is the difference between the Configuration
Wizards and Advanced Configuration?
USC - LCE offers two ways to configure hardware: Configuration Wizards and
Advanced Configuration.
Configuration Wizards guide you through a sequence of steps to configure
your system devices. The Configuration Wizards include iDRAC, RAID,
System Date/Time, and Physical Security. See "Hardware Configuration"
for more information.
Advanced Configuration allows you to configure Human Interface
Infrastructure (HII) enabled devices (for example, NICs and BIOS).
See "Advanced Configuration" for more information.
Does USC or USC - LCE support configuration of all RAID levels and all RAID cards
for
xx 1 x systems?
USC or USC - LCE supports RAID levels 0, 1, 5, 6, 10, 50, and 60 on
PERC 6 cards running PERC 6.1 firmware. RAID 0 and 1 are supported
on the SAS 6/iR.
These are the latest generation of series 7 RAID controllers:
PERC - H700 (Internal) and H800 (External)
SAS - H200 (Internal) and SAS 6 GBPS (External)
Does USC - LCE support rollback of BIOS and firmware?
Yes. See "Rolling Back to Previous BIOS and Firmware Versions" for more
information.
Which devices support system updates?
USC - LCE currently supports updates to the BIOS, iDRAC firmware,
power supply firmware, and certain RAID and NIC controller firmware.
See "Updating the Platform using the Platform Update Wizard" for
more information.
LC1_3.book Page 107 Monday, December 7, 2009 3:14 PM