Manualshelf

Update Manual

ManualsBrandsDell ManualsNAS & storage serversLifecycle Controller 1.3
41424344454647484950
3. Specify the FTP Server or Network Share details.
4. Click Test Network Connection.
After the test is complete, the Network Connection Report is generated with the following
details:
Parameters specified in the Network Settings page - Gateway IP and DNS IP.
Parameters specified in the Enter Access Details page – Proxy IP (only if you have
specified FTP proxy server) and Server IP (FTP address or network share address.)
NOTE: The report always displays the IP address of the host name.
Network Connection Report - FTP Figure 72.