User's Manual

84 Troubleshooting and Frequently Asked Questions
Within Hardware Configuration, what is the difference between the Configuration
Wizards and Advanced Configuration?
USC - LCE offers two ways to configure hardware: Configuration Wizards and
Advanced Configuration.
Configuration Wizards guide you through a sequence of steps to configure
your system devices. The Configuration Wizards include iDRAC, RAID,
System Date/Time, and Physical Security. See "Hardware Configuration"
for more information.
Advanced Configuration allows you to configure Human Interface
Infrastructure (HII) enabled devices (for example, NICs and BIOS).
See "Advanced Configuration" for more information.
Does USC or USC - LCE support configuration of all RAID levels and all RAID cards
for xx1x systems?
USC or USC - LCE supports RAID levels 0, 1, 5, 6, 10, 50, and 60 on
PERC 6 cards running PERC 6.1 firmware. RAID 0 and 1 are supported
on the SAS 6/iR.
Does USC - LCE support rollback of BIOS and firmware?
Yes. See "Rolling Back to Previous BIOS and Firmware Versions" for more
information.
Which devices support system updates?
USC - LCE currently supports updates to the BIOS, iDRAC firmware,
power supply firmware, and certain RAID and NIC controller firmware.
See "Updating the Platform using the Platform Update Wizard" for
more information.
Which devices are supported in Advanced Configuration within Hardware
Configuration?
Advanced Configuration is available for the BIOS and NIC. Depending on
your system configuration, other devices may also appear in Advanced
Configuration if they support the HII configuration standard. See "Hardware
Configuration" for more information.
LC1_2.book Page 84 Wednesday, November 18, 2009 9:42 AM