User's Manual

34 USC and USC - LCE
Hardware Configuration
USC - LCE provides two different methods for configuring your hardware,
both of which are available from the main Hardware Configuration screen:
• Configuration Wizards guide you through setting up system devices.
The Configuration Wizards include: Physical Security Configuration,
System Date/Time Configuration, iDRAC Configuration,
and RAID Configuration.
•
Advanced Configuration allows you to configure certain devices, such as
Network Interface Controllers (NICs) and the BIOS, using Human
Interface Infrastructure (HII).
NOTE: Ensure that you understand the implications of HII before using the
Advanced Configuration feature. HII is part of the UEFI standard; USC - LCE
complies to UEFI version 2.1. See "Advanced Configuration" for more information.
Physical Security Configuration
Use the Physical Security Configuration Wizard to control access to the
system control panel.
To launch the Physical Security Configuration Wizard:
1
Click Hardware Configuration in the left pane.
2 Click Configuration Wizards in the right pane.
3 Click Physical Security Configuration to launch the wizard.
4 Set System Control Panel Access to one of the following options:
•
Disabled — You do not have access to information or control,
other than the information displayed by the management controller,
and you cannot specify actions.
•
View Only — You can move through the data screens to obtain
information using the system control panel interface.
•
View and Modify — You can obtain information and make changes
using the system control panel interface.
5 Click Finish to apply the changes.
To return to the Configuration Wizards screen, click Back.
To exit the wizard, click Cancel.
LC1_2.book Page 34 Wednesday, November 18, 2009 9:42 AM