Service manual

Display Assembly and Display Latch: Dell Latitude D505 Series Service Manual
Display Latch
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by touching an unpainted metal surface on the computer.
1. Remove the
keyboard.
2. Remove the
display assembly.
3. Remove the
display bezel.
4. Remove the M2 x 5-mm screw that secures the display bracket to the top cover.
5. Lift the display bracket out of the top cover, and then remove the display latch.
NOTE: Ensure that the display bracket is upright when you replace the display
latch.
file:///F|/Service%20Manuals/Dell/Latitude/d505/display.htm (11 of 12) [2/28/2004 8:13:51 AM]