Service manual

Display Assembly and Display Latch: Dell Latitude D505 Series Service Manual
6. Starting at the bottom of the display panel (by the DELL™ logo), use your
fingers to separate the bezel from the top cover by lifting the inside edge of the
bezel away from the top cover.
Display Panel
14.1-Inch Display Panel
CAUTION: Before performing the following procedures, read the safety
instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by touching an unpainted metal surface on the computer.
1. Follow the instructions in "
Preparing to Work Inside the Computer."
2. Remove the
keyboard.
3. Remove the
display bezel.
4. Remove the eight M2 x 5-mm screws from each side of the display- panel
adapter rails.
5. Lift the display panel, and rotate the display panel out of the display cover.
6. Remove the four M2 x 3-mm screws from each side of the display panel to
remove the adapter rails.
When reinstalling the adapter rails to the replacement display panel, orient the
rails so that the "This side up" markings are facing you, and then reattach the
rails with the four M2 x 3-mm screws. (The "This side down" markings on the rails
should be visible from the rear side of the display panel.)
file:///F|/Service%20Manuals/Dell/Latitude/d505/display.htm (7 of 12) [2/28/2004 8:13:51 AM]