Service manual

Display Assembly and Display Latch: Dell Latitude D505 Series Service Manual
1 M2 x 5-mm screws (6) 1428U 4 display panel D1724
2 display bumpers (6) K1681 5 top cover H1375
3 display bezel H1370 6 M2 x 5-mm screws (8) 1428U
Display Bezel
CAUTION: Before performing the following procedures, read the safety
instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as
the back panel) on the computer.
1. Follow the instructions in "
Preparing to Work Inside the Computer."
2. Remove the
keyboard.
3. Remove the
display assembly.
4. Use a plastic scribe to pry the six display bumpers out of the screw holes located
on the front of the bezel.
5. Remove the six M2 x 5-mm screws located on the front of the bezel.
NOTICE: Carefully separate the bezel from the top cover to avoid damage to
the bezel.
file:///F|/Service%20Manuals/Dell/Latitude/d505/display.htm (6 of 12) [2/28/2004 8:13:51 AM]