Service manual

Microprocessor Thermal-Cooling Assembly: Dell Latitude D505 Series Service Manual
1 microprocessor thermal-cooling assembly H1309
Installing the Microprocessor Thermal-Cooling
Assembly
1. Slip the left side of the microprocessor thermal-cooling assembly underneath the
palm rest and then place the assembly over the microprocessor.
2. Tighten the four captive screws, labeled "1" through "4," in consecutive order.
3. Reconnect the two antenna cables and then secure them into the two antenna-
securing clips.
4. Reconnect the display cable to the display cable connector and then secure the
display cable in its three display-cable routing clips.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/d505/thermal.htm (4 of 4) [2/28/2004 8:13:49 AM]