Specifications

4-46 Dell Latitude CP and CPi Service Manual
0RGXOH/DWFK$VVHPEOLHV
Keep pressure applied to the slider-spring assembly while unsnapping the
latch to prevent the slider-spring assembly from coming loose from the
case. If the slider-spring assembly does come loose from the case:
a. Carefully reinsert the spring onto the plunger on the slider, and reinstall
the slider-spring assembly into the holding features on the inside of the
case.
b. Ensure that the plunger is inserted in its respective hole, that the side
of the slider with the two bumps is facing the rear of the case, and that
the surface with the wear ribs is facing the bottom of the case (see Fig-
ure 4-29).
module latch
assemblies (2)
spring (2)
module latches (2)