Service manual

Running the Dell Diagnostics: Dell Latitude CP
The Key-help option displays a list of key controls available for the selected option. The Quit
Menu option returns you to the Main menu.
Select
Select allows you to select individual test groups to tailor the testing process to your particular
needs. You can choose one or more test groups and run them sequentially or individually.
When you choose Select, five options are displayed: All, One, Clear All, Key-Help, and Quit
Menu.
To select all the test groups, highlight All in the Select menu and press <Enter>. To select an
individual test group, either press the up- or down-arrow key to highlight the test group and
then press the <Spacebar>, or highlight One in the Select menu and press <Enter>.
To reverse a test group selection, highlight the test group and press the <Spacebar>. To clear
all selected test groups, select Clear All.
The Key-Help option displays a list of key controls available for the selected option. The Quit
Menu option returns you to the Main menu.
Subtest
Most of the test groups consist of several subtests. Use the Subtest option to select individual
subtests within the test group(s).
When you select Subtest, many of the same options as those on the Main menu are displayed:
Run, Select, Options, Test Limits, About, Key-Help, and Quit Menu. Each of these options is
explained in the following subsections.
Run (Under Subtest)
Run in the Subtest menu displays five options: One, Selected, All, Key-Help, and Quit Menu. If
you select One, only the highlighted subtest is run. If you choose Selected, only the selected
subtests are run. If you select All, every subtest in the selected test group is run. (The subtests
are run in the order they are listed.)
The Key-Help option displays a list of available key controls. The Quit Menu option returns you
to the previous menu.
Select (Under Subtest)
file:///I|/SERVICE%20MANUALS/DELL%20MANUA...IES%20REF%20AND%20TROUBLESHOOTING/RUN.HTM (8 of 37)6/21/2004 1:38:45 AM