Reference Guide

Table 40. Fingerprint Reader (continued)
Category Description NB-2024–S2
Dell ControlVault 2.0 support Device connects to Dell ControlVault
2.0 for usage and processing . Enabled
through Dell ControlVault driver .
Yes
Programmed False Accept Rate Describes the programmed rate at which
the fingerprint match algorithm is set to
ensure false fingers are not accepted
0.10%
Programmed False RejectionRate Describes the programmed rate at which
the fingerprint match algorithm is set to
inappropriately reject a proper finger
1.00%
Template storage Describes the location of where
templates are stored for future
reference
Dell ControlVault encrypted
Markers to generate template Number of markers utilized to generate
a successful match of presented
fingerprint
>12
Match on chip Match of fingerprint occurs off host
of main CPU to remove possibility of
spoofing
No
FIPS 201 (PIV/HSPD-12) Certified Device certified with FIPS 201/PIV/
HSPD-12 requirements
No
ANSI/INCITS 378 standard support Template creation process provides
support for ANSI/INCITS 378 standard
Yes
Security Option Dell ControlVault 2.0
Table 41. Dell ControlVault 2.0
Title Description Dell ControlVault 2.0
CPU Technology N/A 250 Mhz ARM M3
RAM N/A 385dpi
ROM N/A 11.9 mm x 11.9mm
TPM included TPM enumeration included within
ControlVault
No
Host Interface N/A USB 2.0
Fingerprint Processing on Chip Fingerprint processing occurs within
secure boundary of ControlVault
Yes
Windows WBF Support Support for Windows Biometric
Framework when Fingerprint Reader is
attached
Yes
FIPS 140-2 Level 3 Compliant Device compliant with FIPS 140-3 Level
2 requirements
Yes
FIPS 140-2 Level 3 Certified Device certified with FIPS 140-3 Level 2
requirements
Yes
Windows Certified WHCK certified drivers for Windows 7,
8, 8.1, 10
Yes
38 Engineering specifications