Deployment Guide

Figure 44. Apply Operating System

b) Browse to the location where you have placed the image package.

c) From the Image index drop-down list, select a value of the image. Ensure that the value is the highest of 1-1, 2-2, 3-3.

NOTE:

If only a single image exists, then by default the value is displayed as 1-1.

d) Select the Use an Unattended or Sysprep answer file for a custom installation check box.

e) Browse to the location where you have placed the unattended installation software package created in step b.

f) In the File name field, enter the file name of the unattended installation software package.

g) From the Destination folder drop-down menu, select Specific disk and partition for destination.

h) From the Disk drop-down menu, select 0.

i) From the Partition drop-down menu, select 5.

j) Click Apply and then click OK.

50. Click Install Operating System, and click Add.

51. In the Properties tab, enter Apply Network Settings in the Name field.

Deploying operating system image by using Operating Systems Deployment (OSD)