Users Guide
NOTE: Whenever Client is registered to a WDM server, all the details that are congured for discovery are taken from
that WDM server.
4 To connect with WDA Management Server, enable any of the following WDA discovery options:
• Enable all discovery methods.
• DNS Hostname
• DNS SRV record lockup
• DHCP option tags
• Manual discover from WDM.
5 To automatically discover the management, set the time interval in the Autodiscover management server after eld.
6 Click Register.
Conguring CCM by using WDA
1 From the Select management server drop-down list, select Cloud Client Manager-CCM.
Figure 3. Device registration
2 In the Server settings section, do the following:
• In the Management Server eld, enter the IP address of the CCM management server; in the Port eld, enter the CCM server
port number.
• In the Notication Server eld, enter the MQTT server url; in the Port eld, enter the MQTT server port number.
• In the Group eld, enter the group token of the CCM management server.
3 Click Register.
Management interface
19