Administrator Guide

Upgrading SCCM 2007 /CongMgr 2012 SP1

clients with CongMgr 2012 R2 clients on older

Dell Wyse WES7 builds

If you are planning to upgrade the older Dell Wyse WES7 builds that has SCCM 2007/ CongMgr 2012 SP1 Clients with CongMgr 2012 R2

clients, do the following:

1 Log in as an Administrator and disable FBWF.

2 Uninstall the Windows Embedded Device Manager client from Programs and features.

3 Uninstall SCCM 2007/CongMgr 2012 SP1 client using CCM setup /uninstall command.

4 Install the CongMgr 2012 R2 client.

5 Add the following FBWF exclusion list either from the Wyse FBWF tray utility or FBWFMgr.exe command line:

The following exclusions should be added in FBWF enabled state:

\Windows\SMSCFG.ini

\Windows\CCM\wedmtrace.log

\Windows\CCM\clientstate.dat

\Regfdata

\Windows\CCM\InventoryStore.sdf

\Windows\CCM\StateMessageStore.sdf

\Windows\CCM\CcmStore.sdf

\Windows\CCM\ServiceData

6 Reboot the device, and disable FBWF.

7 Merge the following registry:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\RegFilter\Parameters\MonitoredKeys\3]

"ClassKey"="HKLM" "FileNameForSaving"="ConfigMgr.rgf" "RelativeKeyName"="SOFTWARE\\Microsoft\

\CCM\\StateSystem"

8 Get the latest CongMgr 2012 R2 supported scripts from Dell Wyse.

9 Copy the les present in Dell Wyse provided CongMgr 2012 R2 scripts to the following location on your thin client: C:\windows\setup

folder. Overwrite the les when it is prompted.

10 Enable the le based write lter.

11 Follow this entire document.

For more information on client deployment through conguration Manager, refer to technet.microsoft.com/en-us/library/gg682132.aspx.

Upgrading SCCM 2007 /CongMgr 2012 SP1 clients with CongMgr 2012 R2 clients on older Dell Wyse WES7

builds