Administrator Guide

NOTE:
Be sure that the boot order in the BIOS is HDD followed by PXE LAN.
6 Unjoin the client from domain and reboot the client. Log on as a local Administrator.
7 Make any customizations you want (drivers, and so on).
8 Download the CCMDelCert.exe tool, and copy it to the reference thin client C:\windows\setup. This le is used to remove the
Conguration Manager client certicate if they are present from the Conguration Manager reference build.
NOTE:
• The Ccmdelcert.exe tool is part of the SMS 2003 Toolkit 2. Download SMS 2003 Toolkit 2 from the Microsoft web site
at www.microsoft.com/download/en/details.aspx?id=18153
• For 64–bit GPT based images, follow the path C:\windows\setup\Tools.
9 Run C:\windows\setup\WES7_CongMgr_Capture.bat.
NOTE: For 64–bit GPT based images, follow the path and run C:\windows\setup\Build_Master.cmd.
10 Open the services.msc and ensure that SMS Agent Host service is started. If it is not started, start the service.
11 Go to the C:\windows\setup folder and ensure that CCMdelcert.exe is deleted. If not, delete it manually as it must not be used as
part of Dell Wyse builds due to redistribution license restrictions.
NOTE:
For 64–bit GPT based images, follow the path C:\windows\setup\Tools.
12 Now the image is Conguration Manager clone ready.
NOTE
: Do not restart the thin client now. Otherwise, all Conguration Manager related Customizations are
reverted.
Step 2: Prepare Image Capture Media (USB ash Drive).
To create Capture Media (USB ash drive), see technet.microsoft.com/en-us/library/hh397285.aspx#BKMK_CreateCaptureMedia.
Step 3: Use Capture Media to capture the image from the Reference thin client.
1 Attach the prepared USB ash drive or CD/DVD (with the captured media that you prepared in Step 2: Prepare Image Capture Media
(USB ash Drive)) to the reference thin client.
2 Go to the USB pen drive or CD/DVD drive, for example drive D, and launch the TSMBAutoRun.exe le (for example, D:\SMS\Bin
\i386\TSMBAutoRun.exe).
3 On the Welcome to the Image Capture Wizard page, click Next.
4 On the Image Destination page, enter either the remote network shared location (recommended) or the local USB drive path along
with the .wim le name extension, and then click Next.
5 On the Image Information page, click Next.
6 On the Summary page, click Finish. It will take ve to 10 minutes for the image capture wizard to start the capture process. During
the capture process, the machine is syspreped and in WINPE. In the WINPE session, the image will be captured, and after successful
capture, the .wim le is generated and stored.
NOTE
: Once the image is captured, the reference thin client will not be in the same state as it was before the capture because of
sysprep. To bring the reference thin client back to its original state, join the reference thin client to the domain and deploy the OS
as mentioned in Phase 3: Deploying the OS Image to the Destination Client Using the Operating Systems Deployment (OSD)
Task Sequence.
10 Imaging Wyse thin clients with Conguration Manager