Release Notes
WPA2 Security Vulnerability Add-on | 9
10. Enter the Task sequence name, select the appropriate boot image, and then click Next.
11. Right-click the deployment task sequence, and click Edit.
12. From the Add drop-down list, select Software > Install Package.
13. Select the created package and click Apply.
14. Click OK.
15. Deploy the modified task sequence to the required device collection.
Deploying task sequence
1. Click Start > All Programs > Microsoft System Center > Configuration Manager Console.
The System Center Configuration Manger window is displayed
2. Click Software Library.
3. Expand Overview > Operating Systems > Task Sequences, and right-click Task
Sequences.
4. Click Deploy.
5. Enter the task name and click Browse.
6. Select the newly created Devices Collection from the list.
Known issues
Table 9. Known issues
Known issues
Workaround
Wireless connection is disconnected.
SSID is removed from the saved wireless list in the
thin client when you try to unregister the thin client
from the WMS server.
NA
Wyse Device Manager: C:\Temp is not deleted, and
the lock screen is not available when you push from
Wyse Device Manager.
Edit the .rsp manually in the server side with DT
command to delete C:\Temp and enable lock screen
with LU and EL.
SCCM: C:\Temp is not deleted.
NA
Intel WiFi Driver add-on deployment from the SCCM
server fails while deploying the add-on using task
sequence.
Deploy the add-on without task sequence.
Note: An error on the server side is present.
Add-on information
Table 10. Add-on information
Platforms
Wyse 3030 thin client—3290
Wyse 5010 thin client with WES7—D90D7
Wyse 5020 thin client with WES7—D90Q7
Wyse 7010 thin client with WES7—Z90D7
Wyse 7020 thin client with WES7—Z90Q7
Wyse 5020 thin client with WES7P—D90Q7P (European Build)
Wyse 7020 thin client with WES7P—Z90Q7P (European Build)
Wyse 7020 Accelerated Graphics thin client with WES7P—Z90QQ7P
(European Build)
Wyse 5020 thin client with WES7P—D90Q7P (Asian Build)
Wyse 7020 thin client with WES7P—Z90Q7P (Asian Build)