Owner`s manual

Installing the Display Assembly

1. Place the display assembly on the computer.

2. Tighten the screw to secure the display assembly to the computer.

3. Press the hinge cap to the computer.

4. Connect the display assembly cable to the computer.

5. Install:

a. back cover

b. keyboard

c. system fan

d. WLAN card

e. hard drive

f. battery

g. base cover

6. Follow the procedures in After Working Inside Your computer.

Removing the Display Bezel

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove:

a. base cover

b. battery

c. hard drive

d. WLAN card

e. system fan

f. keyboard

g. display assembly

3. Pry out right side of the hinge cover.