Owner`s manual

Installing the WLAN Card

1. Place the WLAN card in its slot on the computer.

2. Connect the WLAN antenna cables to their connectors on the WLAN Card.

3. Press the locking tab.

4. Tighten the screw that secures the WLAN card to the computer.

5. Install:

a. battery

b. base cover

6. Follow the procedures in After Working Inside Your computer.

Removing the System Fan

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove:

a. base cover

b. battery

3. Perform the following steps as shown in the illustration:

a. Lift the locking tab [1].

b. Disconnect the tape that secures the system fan [2].

c. Lift the tape that secures the system fan [3].