Release Notes

Issue 3
DescriptionLasso's "autodiscover" feature works only for EMC CLARiiON arrays and not for hosts attached to Celerra,
EqualLogic, and PowerVault MD Arrays.
Resolution: For those arrays, enter the name or IP address of each attached host.
Versions/Systems Affected: None.
Issue 4
Descriptionspcollect command is not supported on EMC Arrays having FLARE less than R13.
Resolution: Run the command "getall".
NOTE: This command provides less information.
Versions/Systems Affected: None.
Issue 5
DescriptionWhen Lasso is run from a Windows 7, Windows Vista, Windows Server 2008, or Windows Server 2008 R2, if the
User Access Control (UAC) is enabled, the MD Series data collection is not successful. ResolutionMake sure the User Access
Control (UAC) is deactivated.
Versions/Systems Affected: None.
Issue 6
DescriptionRevalidate button should be disabled when user clicks Edit button for any device added previously.
Resolution: Do not click revalidate button while editing the device details.
Versions/Systems Affected: None.
Issue 7
Description: Lasso fails to create collection package, when MD Series is the device in collection and the collection is done on
the Windows 7 system.
Resolution: None.
Versions/Systems Affected: None.
Issue 8
Description: For CLARiiON array, fabrics information is not parsed in output HTML report.
Resolution: See raw data collection for fabrics information.
Versions/Systems Affected: None.
Issue 9
Description: Edit option should be disabled, when the CLARiiON attached windows hosts are validated with cache credentials.
Resolution: For those arrays, enter the name or IP address of each attached host.
Versions/Systems Affected: None.
Issue 10
Description: Lasso collection is unsuccessful on some windows hosts and expects WMI service to be manually restarted.
Resolution: Windows Management Instrumentation(WMI) service needs to be restarted manually.
Versions/Systems Affected: Lasso Version 4.5 and later.
9