Release Notes

Issue 3
Description: Powerpath must be installed on the remote Windows host to get LUN mapping information in the XML and HTML
format of the collection.
Resolution: None.
Versions/Systems Affected: None.
Issue 4
Description: Lasso cannot be installed in folder names having special characters.
Resolution: None.
Versions/Systems Affected: None.
Issue 5
Description: The SAN Configuration HTML format of the collection report displays "unknown" for most attributes as minimal
information is collected from VMware and 64-bit Linux hosts attached to CLARiiON or Celerra.
Resolution: None.
Versions/Systems Affected: None.
Issue 6
Description: To run Lasso, command line JRE Version 1.6 or later is required.
Resolution: None.
Versions/Systems Affected: None.
Issue 7
Description: Lasso installer does not support SystemRoot directory as the destination folder. Therefore, do not select this
directory as the destination folder during Lasso installation.
Resolution: None.
Versions/Systems Affected: None.
Issue 8
Description: Lasso cannot validate the Cisco Ethernet Switches if SSH-1 protocol is enabled on the switch. Lasso supports
SSH-2 protocol.
Resolution: None.
Versions/Systems Affected: None.
Issue 9
Description: On Dell Force10 devices, the "Show running" command fails to run in model s50v.
Resolution: None.
Versions/Systems Affected: None.
Issue 10
Description: Lasso Collects data for MD Series device only when run as Administrator.
Resolution: None.
Versions/Systems Affected: None.
11