Personal Computer User Manual

Back to Contents Page

 Camera Module

Dell™XPS™L401XServiceManual

Removing the Camera Module

Replacing the Camera Module



Removing the Camera Module



1. Follow the instructions in Before You Begin.



2. Remove the battery (see Removing the Battery).



3. Remove the memory module(s) (see Removing the Memory Module(s)).



4. Remove the Mini-Card(s) (see Removing the Mini-Card(s)).



5. Remove the hard drive (see Removing the Hard Drive).



6. Follow the instructions from step 4 to step 6 in Removing the Optical Drive.



7. Remove the palm-rest assembly (see Removing the Palm-Rest Assembly).



8. Remove the keyboard (see Removing the Keyboard).



9. Remove the display assembly (see Removing the Display Assembly).



10. Remove the display bezel (see Removing the Display Bezel).



11. Remove the display panel (see Removing the Display Panel).



12. Gently peel the aluminum foil that secures the camera module to the display back cover.



13. Remove the camera module from the display back cover.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the

computer.

aluminum foil

camera module