Personal Computer User Manual

Replacing the Power-Button Board

1. Follow the instructions in Before You Begin.

2. Use the alignment post to place the power-button board on the top cover.

3. Replace the screw that secures the power-button board to the top cover.

4. Connect the power button-board cable to the system-board connector.

5. Connect the display cable to the system-board connector.

6. Replace the keyboard (see Replacing the Keyboard).

7. Replace the palm-rest assembly (see Replacing the Palm-Rest Assembly).

8. Follow the instructions from step 5 to step 6 in Replacing the Optical Drive.

9. Replace the hard drive (see Replacing the Hard Drive).

10. Replace the memory module(s) (see Replacing the Memory Module(s)).

11. Replace the battery (see Replacing the Battery).

Back to Contents Page

1
screw
2
power-button board
3
system-board connector
4
display cable
5
top cover
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.