Personal Computer User Manual


9. Using your fingertips, gently ease the palm-rest assembly from the computer base.

10. Without pulling hard on the palm-rest assembly, place it away from the display as shown in the illustration below.

11. Lift the connector latch and pull the pull-tab to disconnect the touch-pad cable from the system-board connector.

12. Disconnect the control-strip cable from the system-board connector.


13. Lift the palm-rest assembly off the computer base.
1
tab
2
palm-rest assembly
CAUTION: Carefully separate the palm-rest assembly from the computer base to avoid damage to the palm-rest assembly.
1
control-strip cable
2
top cover
3
tabs (3)
4
palm-rest assembly
5
pull tab
6
touch-pad cable connector