Personal Computer User Manual

Replacing the Daughter Board



1. Follow the instructions in Before You Begin.



2. Align the connectors on the daughter board with the slots on the top cover and place it on the top cover.



3. Replace the screw that secures the daughter board to the top cover.



4. Slide the daughter-board cable into the connector on the daughter board and press the connector latch down to secure the cable.



5. Replace the processor fan and heat-sink assembly (see Replacing the Processor Fan and Heat-Sink Assembly).



6. Follow the instructions from step 9 to step 11 in Replacing the Top Cover.



7. Replace the display assembly (see Replacing the Display Assembly).



8. Replace the keyboard (see Replacing the Keyboard).



9. Replace the palm-rest assembly (see Replacing the Palm-Rest Assembly).



10. Follow the instructions from step 5 to step 6 in Replacing the Optical Drive.



11. Replace the hard drive (see Replacing the Hard Drive).



12. Replace the Mini-Card(s) (see Replacing the Mini-Card(s)).



13. Replace the memory module(s) (see Replacing the Memory Module(s)).



14. Replace the battery (see Replacing the Battery).



Back to Contents Page



daughter-board cable

daughter board

screw

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.