Owners Manual

Dell Integrated Systems for Oracle Database 2.0 - Owner’s Guide 1.1

the/etc/dhcpd/dhcpd.conf file with the MAC addresses of these

network ports.

o To allow easy upgrade of the firmware, or to apply preconfigured switch

settings on the S6000 and the S3048 switches, which can be achieved by

booting the switches in jumpstart mode.

 DHCP is configured to use the DISOD private network so that it does not cause

any conflict with the customer’s own DHCP server. DHCP on LinVM is configured

in the /etc/sysconfig/dhcpd file to listen only on the private management

adapter eth0 to limit the DHCP functionality to the DISOD private network.

NOTE: The virtual memory size is allocated based on the requirement for the base DISOD

configuration. Customers are recommended to observe the memory usage and change

the dynamic memory allocation, as required, for their DISOD configuration.