Owners Manual

Dell Integrated Systems for Oracle Database 2.0 - Owner’s Guide 1.1
26
3.4 Management switch configurations
Dell Networking S3048 1 Gb Ethernet switch is used as the management switch in the
DISOD solution rack. This section provides information about the configuration that the
S3048 management switch ships with.
3.4.1 S3048 switch configurations
This section provides information about the switch settings that the management switch
S3048 ships with.
3.4.1.1 S3048 predefined and preconfigured port functions
Figure 11 shows the details of the predefined port functions and the configuration on the
S3048 management switch.
Figure 11 S3048 predefined and preconfigured port functions
The port connectivity is predefined and preconfigured with the following functional logic:
 Management server connectivity: Ports 2–6 connect to the network ports on the
management server.
 SAN switches connectivity: Ports 7–8 that are located in the same column
connect to the management port on the two SAN switches.
 DAAD storage connectivity: Ports 9–24 connect to the network ports on the
DAAD storage nodes.
o The ports in the same column connect to the network ports on the same
DAAD storage node
o The DAAD node number increases from left to right
o In each column, top ports connect to the management port (LOM port 1
or eth0), and the bottom ports connect to the iDRAC port on the same
DAAD node
 Database node connectivity: Ports 25–40 connect to the network ports on the
database nodes.
o The ports in the same column connect to the network ports on the same
database node
o The database node number increases from right to left
S3048-ON Front
To Mgmt.
Server (P2-6)
To Brocade
6510s (P7-8)
To DAAD
Nodes (P9-24)
To Database
Nodes (P25-40)
Undefined
usage (P41-48)
To S6000
Undefined
usage (P1)
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 321 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 51 5249 50
Undefined
usage (P51-52)