Owners Manual

Dell Integrated Systems for Oracle Business Analytics (DISOBA) – Owner’s Guide 1.0
S6000 VLT Domain Configuration
3.2.4 S6000 Spanning Tree Protocol (STP) Configuration
Though VLT offers a loop-free Layer2 topology, as a best practice to prevent configuration
and patching mistakes Rapid Spanning Tree Protocol (RSTP) is enabled across the two
individual S6000 switches. However, RSTP on both the S6000 switches are configured
with the default bridge priority of 32768.
3.3 S60 Switch Configurations
Figure 11 shows the VLAN and the port channel configuration on the S60 switch.
VLAN Configuration on the S60 Management Switch
RSTP is enabled across the switch with bridge priority set very low to 40960.
U41-S6000
Fo 0/100
Fo 0/108
Fo 0/116
Fo 0/124
U40-S6000
VLTi
Trunk
Po 128
Fo 0/100
Fo 0/108
Fo 0/116
Fo 0/124
VLT Backup Link
U39-S60 (Front) U39-S60 (Rear)
Te 0/68
Te 0/48 Te 0/50
Te 0/68
Po 1
Mgmt 0/0 Mgmt 0/0
Tagged VLAN 10 Tagged VLAN 10
Tagged VLAN 10 Tagged VLAN 10
VLT Peer LAG
VLT Domain 1
Po = Port Channel
U39-S60
Po 1 Po 1