Personal Computer User Manual

Setting Up and Using Your Computer 47
Rebuilding a Degraded RAID 1 Volume
If your computer does not have a spare hard drive, and the computer has
reported a degraded RAID 1 volume, you can manually rebuild the
computer’s redundancy mirror to a new hard drive by performing the
following steps:
1
In Windows XP, click Start → All Programs → Intel
®
Matrix Storage
Manager
→ Intel Matrix Storage Console to launch the Intel
®
Storage
Utility.
In Windows Vista, click
Start → Programs → Intel
®
Matrix Storage
Manager
→ Intel Matrix Storage Manager to launch the Intel
®
Storage
Utility.
2 Right-click the available hard drive to which you want to rebuild the
RAID 1 volume, and click
Rebuild to this Disk .
NOTE: You can use your computer while the computer is rebuilding the RAID 1
volume.
Transferring Information to a New Computer
You can use your operating system "wizards" to help you transfer files and
other data from one computer to another—for example, from an old
computer to a new computer. For instructions, see the following section that
corresponds to the operating system your computer is running.
Transferring Information using Windows XP
The Microsoft Windows XP operating system provides the Files and Settings
Transfer Wizard to move data from a source computer to a new computer.
You can transfer data, such as:
• E-mail messages
• Toolbar settings
• Window sizes
• Internet bookmarks
You can transfer the data to the new computer over a network or serial
connection, or you can store it on removable media, such as a writable CD,
for transfer to the new computer.