Personal Computer User Manual
Table Of Contents
- Contents
- Finding Information
- Setting Up and Using Your Computer
- Front View of the Computer
- Back View of the Computer
- Installing Your Computer in an Enclosure
- Setting Up a Printer
- Playing CDs and DVDs
- Copying CDs and DVDs
- Using a Media Card Reader (Optional)
- Connecting Two Monitors
- Power Management Options in Windows XP
- Power Management Options in Windows Vista
- Enabling SpeedStep™ Technology
- About RAID Configurations
- Transferring Information to a New Computer
- Setting Up a Home and Office Network
- Connecting to the Internet
- Solving Problems
- Troubleshooting Tips
- Battery Problems
- Drive Problems
- E-Mail, Modem, and Internet Problems
- Error Messages
- Keyboard Problems
- Lockups and Software Problems
- Media Card Reader Problems
- Memory Problems
- Mouse Problems
- Network Problems
- Power Problems
- Printer Problems
- Scanner Problems
- Sound and Speaker Problems
- Video and Monitor Problems
- Troubleshooting Tools
- Removing and Installing Parts
- Appendix
- Glossary
- Index
176 Appendix
Changing Boot Sequence for Future Boots
1
Enter system setup (see "Entering System Setup" on page 170).
2
Use the arrow keys to highlight the
Boot Sequence
menu option and press
<Enter> to access the menu.
NOTE: Write down your current boot sequence in case you want to restore it.
3
Press the up- and down-arrow keys to move through the list of devices.
4
Press the spacebar to enable or disable a device (enabled devices have a
checkmark).
5
Press plus (+) or minus (–) to move a selected device up or down the list.
Clearing Forgotten Passwords
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions located in the Product Information Guide.
1
Follow the procedures in "Before You Begin" on page 99.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 101).
3
Locate the 3-pin password connector (PSWD) on the system board.