Personal Computer User Manual
Table Of Contents
- Contents
- Finding Information
- Setting Up and Using Your Computer
- Front View of the Computer
- Back View of the Computer
- Installing Your Computer in an Enclosure
- Setting Up a Printer
- Playing CDs and DVDs
- Copying CDs and DVDs
- Using a Media Card Reader (Optional)
- Connecting Two Monitors
- Power Management Options in Windows XP
- Power Management Options in Windows Vista
- Enabling SpeedStep™ Technology
- About RAID Configurations
- Transferring Information to a New Computer
- Setting Up a Home and Office Network
- Connecting to the Internet
- Solving Problems
- Troubleshooting Tips
- Battery Problems
- Drive Problems
- E-Mail, Modem, and Internet Problems
- Error Messages
- Keyboard Problems
- Lockups and Software Problems
- Media Card Reader Problems
- Memory Problems
- Mouse Problems
- Network Problems
- Power Problems
- Printer Problems
- Scanner Problems
- Sound and Speaker Problems
- Video and Monitor Problems
- Troubleshooting Tools
- Removing and Installing Parts
- Appendix
- Glossary
- Index
132 Removing and Installing Parts
7
Press the two spring clamps and slide out the floppy drive along with the
FlexBay drive cage from the FlexBay slot.
8
Remove the two screws holding the floppy drive in the FlexBay drive cage.
9
Lift the floppy drive to separate it from the FlexBay drive cage.
10
Slide the FlexBay drive cage in the FlexBay slot till it snaps in place.
11
Install the FlexBay drive insert (see "Replacing the FlexBay Drive Panel
Insert" on page 136).
12
Replace the optical drive (see "Installing an Optical Drive" on page 141).
13
Replace the bezel (see "Replacing the Bezel" on page 123).
14
Replace the computer cover (see "Replacing the Computer Cover" on
page 162).
15
Connect your computer and devices to electrical outlets, and then turn
them on.
16
Check the system setup for the appropriate diskette Drive Option changes
(see "Entering System Setup" on page 170).
1 screws (2) 2 FlexBay drive cage
2
1