Personal Computer User Manual
Table Of Contents
- Contents
- Finding Information
- Setting Up and Using Your Computer
- Front View of the Computer
- Back View of the Computer
- Installing Your Computer in an Enclosure
- Setting Up a Printer
- Playing CDs and DVDs
- Copying CDs and DVDs
- Using a Media Card Reader (Optional)
- Connecting Two Monitors
- Power Management Options in Windows XP
- Power Management Options in Windows Vista
- Enabling SpeedStep™ Technology
- About RAID Configurations
- Transferring Information to a New Computer
- Setting Up a Home and Office Network
- Connecting to the Internet
- Solving Problems
- Troubleshooting Tips
- Battery Problems
- Drive Problems
- E-Mail, Modem, and Internet Problems
- Error Messages
- Keyboard Problems
- Lockups and Software Problems
- Media Card Reader Problems
- Memory Problems
- Mouse Problems
- Network Problems
- Power Problems
- Printer Problems
- Scanner Problems
- Sound and Speaker Problems
- Video and Monitor Problems
- Troubleshooting Tools
- Removing and Installing Parts
- Appendix
- Glossary
- Index
130 Removing and Installing Parts
6
Connect the power and data cables to the drive.
7
Connect the data cable to the system board.
8
Slide the hard drive into the hard drive bay until it snaps in place.
9
Check all cables to be certain that they are properly connected and firmly
seated.
10
Replace the support bracket (see "Replacing the Support Bracket" on page 161).
11
Replace the computer cover (see "Replacing the Computer Cover" on
page 162).
NOTICE: To connect a network cable, first plug the cable into the network port or
device and then plug it into the computer.
12
Connect your computer and devices to electrical outlets, and then turn
them on.
13
See the documentation that came with the drive for instructions on
installing any software required for drive operation.
14
Check the system setup for drive configuration changes (see "Entering
System Setup" on page 170).
1 second hard drive (optional) 2 shoulder screws (4)
2
1