Specifications

EMI Shield, Video Card, and Palm Rest: Dell Inspiron 2600 and 2650
Palm Rest
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and
remove any installed battery.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching
an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing the following
procedure.
1. Remove the
keyboard.
NOTICE: You must remove the display assembly before you remove the palm rest; the
display hinges pass through the back of the palm rest.
2. Remove the
display assembly.
3. Remove the
EMI shield.
4. Remove the
video card.
5. Remove the two M2.5 x 5-mm screws from the top of the palm rest.
file:///F|/Service%20Manuals/Dell/Inspiron/2600-50/palmrest.htm (9 of 11) [2/28/2004 6:52:45 AM]