Service Manual

Security
HDD2 password Allows you to set, change, or delete the hard-disk drive
password.
Password Change Allows you to permit or deny system password or HDD password
changes.
Default: Permitted
Computrace Enables or disables the BIOS module interface of the optional
Computrace Service from Absolute Software.
Default: Deactivate
SED Block SID Authentication Enables or disables SED Block SID Authentication.
Default: Disabled
PPI Bypass for SED Block SID Command When there is no drive ownership and the ppibypassforblocksid is
enabled, BIOS requires user input while sending the Block SID
authentication command to SED drives. When
ppibypassforblocksid is disabled, BIOS does not require user input
while sending the Block SID command.
Default: Disabled
Firmware TPM Enable or disable the rmware TPM.
Default: Enabled
PPI Bypass for Clear Command Allows you to control the TPM Physical Presence Interface (PPI).
When enabled, this setting will allow the OS to skip BIOS PPI
user prompts when issuing the Clear command. Changes to this
setting take eect immediately.
Default: Disabled
UEFI Firmware Capsule Updates Enables or disables BIOS updates through UEFI capsule update
packages.
Default: Enabled
WINDOWS SMM SECURITY MITIGATIONS TABLE (WSMT) Enables or disables conguration of platform features on Dell
Client Systems with WSMT-enabled BIOS.
Default: Enabled
Table 6. System setup options—Boot menu
Boot
Fast Boot Enables or disables the fast boot option.
Default: Minimal
Secure Boot Enables or disables the secure boot feature.
Default: Disabled
Load Legacy Option ROMs Enables or disables the Load Legacy Option ROMs.
Default: Disabled
Boot List Option Displays the available boot options.
Default: UEFI
Attempt Legacy Boot Enables or disables legacy boot.
System setup 71