Service Manual

Removing the wireless card

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside

your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Prerequisites

Remove the base cover.

Procedure

1 Locate the wireless card on the system board.

2 Remove the screw (M2x3) that secures the wireless-card bracket and wireless card to the system board.

3 Lift the wireless-card bracket o the wireless card.

4 Disconnect the antenna cables from the wireless card.

5 Slide and remove the wireless card from the wireless-card slot.

Removing the wireless card 45