Service Manual

Replacing the solid-state drive
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
Procedure
1 Align the notch on the solid-state drive with the tab on the solid-state drive slot.
2 Slide the solid-state drive rmly into the solid-state drive slot at an angle.
3 Gently press the other end of the solid-state drive and replace the screw (M2x3) that secures the solid-state drive to the palm-rest
and keyboard assembly.
Post-requisites
Replace the base cover.
15
30 Replacing the solid-state drive