Service Manual
Table Of Contents
- Inspiron 13 7000 2-in-1 Service Manual
- Before working inside your computer
- After working inside your computer
- Removing the base cover
- Replacing the base cover
- Removing the battery
- Replacing the battery
- Removing the solid-state drive
- Replacing the solid-state drive
- Removing the memory modules
- Replacing the memory modules
- Removing the coin-cell battery
- Replacing the coin-cell battery
- Removing the wireless card
- Replacing the wireless card
- Removing the speakers
- Replacing the speakers
- Removing the fan
- Replacing the fan
- Removing the heat sink
- Replacing the heat sink
- Removing the power-adapter port
- Replacing the power-adapter port
- Removing the power and volume-buttons board
- Replacing the power and volume-buttons board
- Removing the status-light board
- Replacing the status-light board
- Removing the touchpad
- Replacing the touchpad
- Removing the I/O board
- Replacing the I/O board
- Removing the display assembly
- Replacing the display assembly
- Removing the system board
- Replacing the system board
- Removing the keyboard
- Replacing the keyboard
- Removing the palm-rest assembly
- Replacing the palm-rest assembly
- Removing the display panel
- Replacing the display panel
- Removing the display back-cover and antenna assembly
- Replacing the display back-cover and antenna assembly
- Removing the camera
- Replacing the camera
- Removing the display cable
- Replacing the display cable
- Downloading drivers
- System setup
- Troubleshooting
- Getting help and contacting Dell

Advanced
Console and for the Dell OS Recovery
tool.
Default: 2
SupportAssist OS Recovery Enable or disable the boot ow for the
SupportAssist OS Recovery tool in the
even of certain system errors.
Default: Disabled
Table 5. System setup options—Security menu
Security
Admin Password Displays if the administrator password
is clear or set.
Default: Not set
System Password Displays if the system password is clear
or set.
Default: Not set
HDD1 Password Displays if the HDD1 password is clear
or set.
Default: Not set.
Asset Tag Set your system’s Asset Tag.
Admin Password Allows you to set the administrator
password. The administrator password
controls access to the system setup
utility.
System Password Allows you to set the system password.
The system password controls access
to the computer at boot.
HDD1 password Allows you to set, change, or delete the
hard-disk drive password.
Password Change Allows you to permit or deny system
password or HDD password changes.
Default: Permitted
109