Service Manual

Replacing the solid-state drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling
the solid-state drive.
Procedure
1 Slide the solid-state drive firmly into the slot on the system board at an
angle and gently press the solid-state drive down until it snaps into
position.
NOTE: Ensure that the solid-state drive is firmly seated.
31