Service Manual

Table 13. System setup options—Advanced menu (continued)
Advanced
Default: 2
SupportAssist OS Recovery Enable or disable the boot flow for the SupportAssist OS
Recovery tool in the even of certain system errors.
Default: Disabled
Table 14. System setup options—Security menu
Security
Admin Password Allows you to set the administrator password. The
administrator password controls access to the system
setup utility.
System Password Allows you to set the system password. The system
password controls access to the computer at boot.
HDD1 password Allows you to set, change, or delete the hard drive
password.
Password Change Allows you to permit or deny system password or HDD
password changes.
Default: Permitted
Computrace Enable or disable the BIOS module interface of the optional
Computrace Service from Absolute Software.
Default: Deactivate
Firmware TPM Enable or disable the firmware TPM.
Default: Disabled.
PPI Bypass for Clear Command Enable or disable the PPI Bypass for Clear Command.
Default: Disabled.
UEFI Firmware Capsule Updates Enable or disable BIOS updates through UEFI capsule
update packages.
Default: Enabled.
Table 15. System setup options—Boot menu
Boot
Fast Boot Enable or disable the fast boot feature.
Default: Minimal
Secure Boot Enable or disable the secure boot feature.
Default: Disabled.
Load Legacy Option ROMs Enable or disable the Load Legacy Option ROMs.
Default: Disabled.
Boot List Option Displays the boot list options.
File Browser Add Boot Option Add the file system for boot option.
File Browser Add Boot Option Delete the file system for boot option.
UEFI Boot Shows the source for Windows Boot Manager.
System setup 81