Service Manual

Replacing the camera

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Topics:

• Procedure

• Post-requisites

Procedure

1. Connect the camera cable to the camera.

2. Using the alignment post, place the camera on the display-back cover and snap it into place.

3. Slide the display cable into its slot on the display-back cover and press down the latch to secure the cable.

4. Adhere the tape on the display-cable connector.

5. Adhere the tape to secure the display cable to the display panel.

Post-requisites

1. Replace the display panel.

2. Replace the display assembly.

3. Replace the wireless card.

4. Replace the battery.

5. Replace the base cover.

Replacing the camera 71