Service Manual

Replacing the display panel

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Topics:

• Procedure

• Post-requisites

Procedure

CAUTION: Place the computer on a soft and clean surface to avoid scratching the display.

1. Align the display panel on the display-back cover and snap the display panel into place.

2. Route the display cable through the routing guide on the left hinge.

3. Route the sensor-board cable through the routing guide on the right hinge.

Post-requisites

1. Replace the display assembly.

2. Replace the wireless card.

3. Replace the battery.

4. Replace the base cover.

64 Replacing the display panel