Service Manual

Removing the display panel

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Topics:

• Prerequisites

• Procedure

Prerequisites

1. Remove the base cover.

2. Remove the battery.

3. Remove the wireless card.

4. Remove the display assembly.

Procedure

1. Release the sensor-board cable from the routing guide on the right hinge.

2. Release the display cable from the routing guides on the left hinge.

3. Using a plastic scribe, pry the display panel off the display-back cover.

Figure 67. Removing the display panel

display panel 2. display hinges (2)

3. routing guide 4. sensor-board cable

5. plastic scribe 6. display cable

62 Removing the display panel