Service Manual

Removing the display assembly

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Topics:

• Prerequisites

• Procedure

Prerequisites

1. Remove the base cover.

2. Remove the battery.

3. Remove the wireless card.

Procedure

1. Remove the screw (M2x3) that secures the display-cable bracket to the system board.

2. Lift the display-cable bracket off the system board.

3. Peel off the tape to access the display cable.

4. Open the latch and disconnect the display cable.

48 Removing the display assembly