Service Manual

Replacing the memory module

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Topics:

• Procedure

• Post-requisites

Procedure

1. Lift the Mylar to access the memory-module slot.

2. Align the notch on the memory module with the tab on the memory-module slot and slide the memory module firmly into the

slot at an angle.

3. Press the memory module down until it clicks into place.

NOTE: If you do not hear the click, remove the memory module and reinstall it.

Figure 54. Replacing the memory module

a. Mylar

b. memory module

Post-requisites

1. Replace the battery.

Replacing the memory module 43