Service Manual

Replacing the base cover

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Topics:

• Procedure

Procedure

1. Slide the tabs on the base cover into the slots on the palm-rest and keyboard assembly and snap the base cover into place.

2. Replace the nine screws (M2.5x7) that secure the base cover to the palm-rest and keyboard assembly.

3. Replace the screw cover into its slot on the base cover.

Replacing the base cover 13