Users Guide

2. Click Next.
3. On the Guest Operating System Installation page, select one of the following options and click Next.
● Installer disc
● Installer disc image file (ISO)
● I will install the operating system later
The Select the Guest Operating System page is displayed.
4. Select the guest operating system and from the Version list, select the version of the operating system.
5. Click Next.
The Name the Virtual Machine page is displayed.
6. Enter a name for the virtual machine, click Browse, and then select a location to save the virtual machine.
7. Click Next.
8. On the Specify Disk Capacity page, enter the required maximum disk size.
9. Select Store virtual disk as a single file, click Next, and then click Finish.
Results
The virtual machine is created.
Modify virtual machine settings in VMware Workstation Pro
Steps
1. Open the VMware Workstation Pro application, select the virtual machine from the left pane, and then click Edit virtual
machine settings from the right pane.
2. On the Hardware tab, perform the following steps:
a. Click Memory and change the value of Memory for this virtual machine from 1024 MB to 2048 MB.
b. Click Processors and change the value of Number of processor and Number of cores per processor from 1 to 2.
c. Click Sound Card and clear Connect at power-on.
d. Click Printer and clear Connect at power-on.
3. Click OK.
Install Windows 10 on VMware Workstation Pro
Steps
1. Open the VMware Workstation Pro application, select the virtual machine from the left pane, and then click Power on this
virtual machine from the right pane.
2. Press any key on your keyboard to boot from CD or DVD.
3. Enter your language, select other preferences, and then click Next.
4. Click Install Now.
If the Activate Windows page is displayed, perform one of the following steps:
● To use the Windows MAK volume license, enter a product key.
● To use OEM version of Windows, click I don't have a product key.
5. Select the operating system that you want to install and click Next.
6. Read and accept the license agreement and then click Next.
7. Select Custom: Install Windows only (advanced).
8. Select the unallocated space, click New, if required, change the size, and then click Apply.
9. Select the primary partition and click Next.
The Windows 10 operating system is installed, and the virtual machine is restarted.
10. Select the region and keyboard layout, set up the network if required, and then click Connect now.
11. Enter the username, password, and other preferences for the system, and then click Next.
14
Using ImageAssist Dynamic on virtual machine