Users Guide

Introduction

ImageAssist is a tool set that enables you to use Dell imaging services to quickly create and maintain a ready-to-deploy

Microsoft Windows image. Depending on your requirement, you can either use ImageAssist Static or ImageAssist Dynamic to

create an image.

To use ImageAssist Dynamic, install the ImageAssist Dynamic tool.

ImageAssist Static

The ImageAssist Static tool enables you to create and capture a Microsoft Windows image for a single platform. You must

create multiple images to support multiple system types.

ImageAssist Static allows you to:

● Create a bootable ImageAssist USB drive.

● Capture your local hard drive as a Microsoft Windows image file.

● Test your Microsoft Windows image file by restoring it on your local hard drive.

ImageAssist Static does not sysprep the Windows image, update or install drivers, or modify settings within the captured Static

image.

NOTE: It is your responsibility to verify the image content and test the captured images.

NOTE: Some partition sizes or orders may be modified to work with the Dell factory processes or to adhere to Microsoft

guidelines.

NOTE: To comply with the ImageAssist license agreement, you must configure and customize the systems using Dell Client

Configuration Services.

Supported operating system and recommended

framework

● ImageAssist is supported on Windows 10 (64-bit) Education, Enterprise, and Pro operating system.

● Microsoft .NET Framework 4.7.2 or later must be installed on the system.

NOTE:

For the list of systems that support ImageAssist, see the system models that are listed in the Dell Family Driver

Packs page at Dell.com/FamilyPacks.

4 Introduction