Release Notes

Workaround N/A
Systems affected All systems with multiple backplanes supported by this release.
Tracking number 122290
SEL logs in the setup menu and LC logs in the
iDRAC GUI not matching
Description Different error messages are logged for memory error rate in iDRAC HII and iDRAC GUI and therefore the logs do
not match.
Workaround Check the LC logs through iDRAC GUI.
Systems affected All systems supported by this release.
Tracking number 119161
MaxReadingRange and MinReadingRange for
Readingvolts attributes displayed incorrectly
Description Redfish reads the properties MaxReadingRange and MinReadingRange as per DMTF however, the same are not
supported by platform infrastructure for PSU and CPU.
Workaround N/A
Systems affected All systems supported by this release.
Tracking number 119516
iDRAC DUP update fails on SLES when secure
boot is enabled
Description
On the SLES OS version 15 while secure boot enabled, if you perform iDRAC DUP update, it fails with an error
"This Update Package is not compatible with your system."
Workaround For iDRAC DUP updates, use other interfaces such as iDRAC GUI, RACADM, or WSMAN.
Systems affected All systems supported by this release.
Tracking number 113574
CPLD update repeats three times
Description
CPLD update completes successfully at the first instance, but continues with the update twice. The host reboots
three times, logging two successful updates and one failed update in the Lifecycle Controller Log.
Workaround After the first successful update, cancel Lifecycle Controller Actions using F2. F2 > iDRAC Settings >
LifecycleController > Cancel LifecycleController Actions.
Systems affected All systems supported by this release.
Tracking number 127197
Boot mode error during OS deployment
Description
While deploying OS using LC UI, if the current boot mode is set to UEFI and you change the boot mode to BIOS
and click Finish on the last LC UI page, an error is displayed stating that the boot mode could not be set. The
16 Known issues — To be fixed in future releases