API Guide
Table Of Contents
- iDRAC9 with Lifecycle Controller Version 3.00.00.00 Redfish API Guide
- Overview
- Redfish-based systems management
- Redfish resources
- AccountService
- Chassis
- ComputerSystem
- EthernetInterfaces
- EventService
- EventDestination
- JSONSchemas
- LogEntry
- LogService
- Manager
- OEMManager
- ManagerAccount
- ManagerNetworkProtocol
- MessageRegistry
- Power
- Processor
- Role
- SerialInterfaces
- ServiceRoot
- Session
- SessionService
- SimpleStorage
- TaskService
- Thermal
- VirtualMedia
- VLanNetworkInterface
- BIOS
- SecureBoot
- UpdateService
- SoftwareInventory
- AttributeRegistry
- DellBootSourcesRegistry
- DellBootSources
- DellManager
- DellServiceRoot
- DellAttributes
- DellUpdateService
- DellCertificates
- DellJob
- Examples
Description
This action is used to reset the chassis.
Supported HTTP methods and privileges
HTTP method Required privilege
POST ConfigureComponent
Updatable properties
Property Value
ResetType
On
ForceOff
Supported status codes
HTTP status code Extended information
204
400
Base.1.0.PropertyValueTypeError
Base.1.0.PropertyValueNotInList
Base.1.0.PropertyUnknown
Base.1.0.PropertyNotWritable
Base.1.0.PropertyValueFormatError
500 Base.1.0.InternalError
503
URL
/redfish/v1/Chassis/<ID>/Sensors/Voltages/<ID>
Supported HTTP methods and privileges
HTTP method
Required privilege
GET Login
Supported status codes
HTTP status code
200
400
500
NOTE: On PowerEdge FX2 systems, iDRAC can display additional instrumentation data from the sensors on the server
only if the Chassis Monitoring setting is set to enabled on iDRAC and CMC.
Contained resources
• Power
• Thermal
12