Release Notes

Dell tracking: 64888

38. Description

When NVMe SSDs are in RAID mode, some drives may not be displayed in the Slot summary section on the Enclosure page.

Resolution

• Reinsert the drives that are not displayed.

• Use the Physical Disk page on the iDRAC web interface (Storage > Overview > Physical Disks) to see the details of drives and

the slot information.

Version/Systems affected: PowerEdge R640

Dell tracking: 64821

39. Description

For 128 GB DIMMs, the octal/hexa rank is not displayed in iDRAC web interface.

Resolution

None

Version/Systems affected: All systems supported by this release.

Dell tracking: 65870

40. Description

When many jobs (>150) and LC Log entries are present, the internal iDRAC file-system may run out of space. This prevents new LC

Log entries from getting saved and can also prevent the iDRAC from being restarted using a command such as racadm racreset.

Resolution

To avoid the issue, periodically clear old jobs.

If you are unable to reset the iDRAC, power cycle the system so that the iDRAC reboots. To perform a power cycle:

• Monolithic systems — Disconnect the power connection

• Modular systems — Perform a virtual reseat

Version/Systems affected: All systems supported by this release.

Dell tracking: 65515

41. Description

After deleting any user using the iDRAC web interface, IPMI commands and applications that use IPMI may not work for the root user.

Resolution

After deleting a user, use any interface to explicitly set the password for the root user.

Version/Systems affected: All systems supported by this release.

Dell tracking: 64610

42. Description

After CPLD updated, although the job status shows Running in iDRAC Job Queue, the new CPLD is displayed in system inventory and

the version change log for the new CPLD is displayed in LC log. After some time the job status changes to Failed.

Resolution

Reset iDRAC to update the status.

Version/Systems affected: All systems supported by this release.

Dell tracking: 64871

43. Description

After you perform a SupportAssist log collection on the iDRAC web interface (Maintenance -> SupportAssist -> Start a collection),