Release Notes

Resolution
Restart the iDRAC to display the PCIe SSDs in the Enclosure view.
Version/Systems affected: All systems supported by this release.
Dell tracking: 64010
33. Description
Using Lifecycle Controller, if you try to update firmware (except driver pack, ISM, OS collector, diagnostic DUPs) and the firmware
partition is full, the following warning message is displayed: Insufficient space to store the firmware images.
Deleting all rollback firmware images. Do you want to continue? If you click No, the previous screen is
displayed and if you click Apply again to update the firmware, the same warning message is displayed. If you click Yes, the update
operation fails.
Resolution
To complete the firmware update operation:
• Click Yes when the warning message is displayed for the first time.
• If you clicked 'No' when the warning was displayed for the first time, go to the previous page (Step 2 of 3: Enter Access Details)
and start the update again. When the warning message is displayed, click
Yes to complete the update.
If you do not want to delete the rollback firmware image, you can cancel the update.
a. Click No on the warning message.
b. On the Lifecycle Controller page (Step 3 of 3: Select Updates), click Cancel.
Version/Systems affected: All systems supported by this release.
Dell tracking: 64280
34. Description
If a Backup and Export Server Profile operation is in progress and you set LC attributes using DCIM_LCService.SetAttribute
method of WSMan interface, further Set operations on LC attributes from WSMan may fail.
Resolution
Clear the pending configuration for LC attributes using the Redfish interface.
Version/Systems affected: All systems supported by this release.
Dell tracking: 62205
35. Description
Using iDRAC web interface, you may be unable to delete iDRAC users on first attempt. The following error message is displayed:
RAC0508: An unexpected error occurred. Wait for few minutes and retry the operation. If the
problem persists, contact service provider.
Resolution
Retry the operation to delete the user.
Version/Systems affected: All systems supported by this release.
Dell tracking: 64004
36. Description
If redundancy policy has changed from A/B Grid Redundant to Non Redundant, and you try to get the PSU redundancy health-
status through SNMP get/walk using
.1.3.6.1.4.1.674.10892.5.4.200.10.1.42, you may get incorrect health status.
Resolution
Restart iDRAC to get the correct health status.
Version/Systems affected: All systems supported by this release.
Dell tracking: 64196
37. Description
Rollback operation from LC GUI may fail for some components.
Resolution
• Use iDRAC GUI to perform the rollback operation.
• Download and install the previous version of the firmware (downgrade) using any of the supported interfaces.
Version/Systems affected: All systems supported by this release.
20
Known Issues — To be fixed in future releases